How a Pet's Name Goes on an Urn: Engraved, Printed or Painted
A pet's name can be engraved into the clay, raised on a plaque, printed or painted by hand. How each is done, how it looks, and how many letters each design allows.
A pet’s name goes onto a Pepple Studio urn in one of four ways, and the design decides which: engraved into the clay, set on a raised plaque, printed on the front, or painted with a brush. An engraved name, which is what most people mean by pet urn name engraving, is pressed or cut into the clay before firing, so it is the one you can feel, and it cannot wear off.
Every name is copied exactly as you type it, and where a design sets a limit it runs from 8 to 15 characters.
How is a pet’s name put on an urn?
A pet’s name is put on a Pepple Studio urn in one of four ways, and the method comes with the design rather than being a separate choice: engraved into the clay, set on a raised plaque, printed, or painted by hand. Engraved names are made before firing, either pressed in letter by letter with stamps or cut freehand with a pointed tool, so the letters are part of the clay itself. On Heart & Bow the name is cut with a stylus, so each letter is spaced by eye to follow the curve of the jar, and in the kiln the glaze gathers in the letters and darkens them. The table below shows which design uses which method.
| How the name goes on | Designs | What you notice |
|---|---|---|
| Engraved into the jar | Pastel Clouds, Heart & Bow, Sleeping Daisy, the standard urn | Letters sunk into the surface, which you can feel |
| On a raised plaque | Tulip, Constellation | The name sits on its own small panel, standing out from the jar |
| Sculpted onto the front | Botanical & Ladybug | Part of the clay, like an engraved name |
| Printed on | Night Sky, Poppy & Butterfly, Hand-Painted Meadow | Flat lettering on the front of the jar |
| Painted by hand | Painted Daisy, Woodland Diorama, Sky Alcove, Floral Alcove, Watercolour Clouds | Flat lettering in a colour or script that matches the design |
Plaques are not all lettered the same way. On Tulip the letters are cut into the plaque by hand, while on the Tiger Lily urn they stand up from it. Painted names follow the design: Painted Daisy uses the colour of its daisies and a font you choose, and Floral Alcove a flowing script.

A name plaque on an unfired jar in our workshop. The plaque is its own small piece of clay, joined to the jar before firing, and the colour is going on by brush.
Engraved or painted: which name lasts longer?
An engraved name and a painted name on a Pepple Studio urn both last, in different ways. An engraved name is part of the clay itself: it was made before firing, so there is nothing on the surface that could rub away, and you can feel it under a fingertip. A painted name is brushed on before firing along with the rest of the colour, and the kiln bonds it to the surface, so it is flat to the touch. Printed names are flat too. The practical difference is how the name reads rather than how long it lasts: an engraved name shows through shadow, a painted or printed one through colour.

An unfired Hand-Painted Meadow urn in our workshop. The name sits flat above the painted landscape, with nothing to feel.
If a name you can feel matters most to you, choose a design from the first three rows of the table. If you would rather the name looked like part of the painting, the printed and painted designs do that.

A raised plaque after firing. The letters stand up from the plaque and take the glaze a shade darker than the panel around them, so the name reads without being painted.
How long can the name on a pet urn be?
How long the name on a Pepple Studio urn can be depends on the design, because the letters have to fit the space it gives them. The published limits run from eight characters to fifteen, and the table below lists every one of them. Most everyday names fit any design: Luna, Max and Bella are well inside even the shortest limit. The count starts to matter with longer names. Sebastian has nine letters, so it is one too many for the eight-character designs but sits comfortably on a ten-character plaque. It is worth counting before you choose a design rather than after, because the limit belongs to the space on the jar and cannot be stretched. Where a listing gives no limit, the design page shows where the name sits, which is a fair guide: a name on a small plaque has less room than one painted round the rim of a lid.
| Design | Where the name goes | Limit |
|---|---|---|
| Little House Garden | Engraved on the front | 8 letters |
| Constellation | Raised plaque on the front | 8 characters |
| Hand-Sculpted Urn with Painted Ashes Jar | Name plate on the front | 8 characters |
| Sculpted Face Relief | Hand-stamped plaque shaped like a bone | 10 characters |
| Seaside Lighthouse | Front of the jar | 10 letters |
| Pink Blossom | Plaque on the front | 10 characters |
| Sleeping Daisy | Engraved on the front | 12 letters |
| White Heart | Engraved and fired into the jar | 12 letters |
| Tiger Lily | Nameplate on the front | 12 characters |
| Hand-Painted Portrait | Banner | 15 characters |
On Heart & Bow there is no fixed count, because the name follows the curve of the jar and a longer name is set on a shallower curve. If the full name does not fit, the name you actually called them by is often the one worth putting on.
Can you add dates or a short message?
You can add dates or a short message on some Pepple Studio designs, though not on all of them. Poppy & Butterfly can carry dates as well as the name if you want them, and Rainbow & Shooting Stars puts a year and a tiny paw print beside the name on the front. Watercolour Clouds paints the name and dates, or a short message instead, along the rim of the lid, just below the figurine. Whatever you add is copied exactly as you write it, so write a date range in the form you want to see on the urn, such as 2008–2026 or April 2012 to July 2026.

An unfired urn in our workshop, with the name and the years cut into the front and picked out in colour.
What happens if the name is spelled wrong?
If a name is spelled wrong because of what was typed in the order, it cannot be put right after firing, so the moment to catch it is the approval photograph. Pepple Studio copies names, dates and any other text exactly as you supply them, including spelling and punctuation. Before anything goes into the kiln, you receive a photograph of the unfired piece, and that is the point to check every letter, because clay can still be changed then and cannot be once it is fired. A piece is not remade free of charge for a typo in what was submitted, which is set out in our terms. The other case is different. If the name on the urn is not the one in your order, the mistake is ours rather than a return, and we remake it, as the returns page explains. The approval step itself is described in how it works.
Where each design puts the name
Each design in the first table has its own page showing where the name sits, and the urn themes page puts them side by side, and every urn is listed in the ceramic urn collection. How the patterns and raised work around the name are made is covered in painted or raised.

